Horizontal turning lathes
Vturn-Q200: Multiple turret turning centers
Vturn-NP16/NP20: Linear motion guideways, narrow lathe width only 1488mm
Vturn-16/20/26(HD): Box guideways, belt-driven spindle, no C-axis (no milling turret)
VturnII-16/20: Box guideways, belt-driven spindle, C-axis by built-in spindle with VDI milling turret
Vturn-S26/S36: Box guideways, belt-driven spindle, C-axis with BMT turret
Vturn-A16/20/26: Box guideways, built-in spindle only, C-axis/Y-axis/subspindle with VDI or BMT turret
Vturn-36: 2-step gearbox for heavy cutting
Vturn-40/45/46: Box guideways, belt-driven spindle with gearbox, C-axis with VDI milling turret
Vturn-20E/26E: Box guideways, heavy cutting, Fanuc 0iMate-TD control
Vertical turning lathes
Vturn-V560: New vertical lathe Vturn-560 to meet higher roundness requirement for auto parts
Vturn-V760: With a maximum turning diameter of 760mm and a swing of 900mm. The standard Fanuc αP40i wide range motor along with ZF gearbox provide high torque at extremely low spindle speeds
Vturn-C1000: The Vertical Turning Lathe offers a swing over bed of 1100mm with a maximum turning diameter of 1m and an overall turning length of 850mm
Horizontal machining centers
Vcenter-H400: Increased productivity 48/48/48 m/min; BBT-40 (BCV-40) tooling; 60 tools and 15000 rpm / 22kW (29.5 HP)
Vcenter-H500HS: Increased productivity 30/30/24 m/min; BT-40 (CT-40) tooling; 40 tools and 15000 rpm / 22kW (29.5 HP)
Vcenter-H500: Increased productivity 24/24/24 m/min; BT-50 (CT-50) tooling; 40 tools and 6000 rpm / 15kW (20 HP)
Vcenter-H630HS: Increased productivity 48/48/48 m/min; BBT-50 (CT-50) tooling; 60 tools and 10000 rpm / 30kW (40 HP)
Vcenter-H630HD: Increased productivity 24/24/24 m/min; BT-50 (CT-50) tooling; 60 tools and 902 Nm
Vcenter-H1000: Increased productivity 20/20/15 m/min; BT-50 (CT-50) tooling; 90 tools and 1072 Nm
Vertical machining centers
Vcenter-F76/F106: Vertical machining center built with LM guideways and belt-driven spindle for mass production
Vcenter-85B/102B: Machining centers built with box slideways that mix high production demands with heavy cutting conditions.
Vcenter-G135/165: Vertical machining centers built to withstand the heaviest of today’s cutting conditions.
Vcenter-102E: Economic & reliable for mass production!
Vcenter-P76/P106/P136: High rapid feeds 48 m/min with 12000rpm Bigplus BBT-40 spindle. 30 tools, roller guideways, bottom guarding flush & Screw chip removers are included.
Vcenter-A85/A110/A130: High rapid feeds 48 m/min with 12000rpm spindle and even heavier part loading. Roller guideways, bottom guarding flush & Screw chip removers are included.
5-axis machining centers
Vcenter-AX380: Trunnion type tilting table (A+C axes) with innovative non-backlash rollercam mechanism offers excellent solution for small part machining. Higher rotating speed and machining accuracy than conventional worm gear mechanism shorten cycle time. Higher clamping rigidity than DD motor facilitates 4+1 axis heavy cutting. BIG-PLUS BT-40 (BBT-40) spindle 12000rpm (15kW).
Vcenter-AX630: High rapid feed 48 m/min with roller type linear motion guideways for 3 axes. Trunnion type tilting table (B+C axes) fixed on machine base enhances structure stiffness. Backlash-less roller-cam drive mechanism rotated at higher speed further reduce the cycle time. BIG-PLUS BT-40 (BBT-40) spindle 12000rpm (15kW)
Vcenter-AX800: vertical machining center is equipped with a swivel head on the traveling column to implement 5-axis machining on large part (diameter up to 1000mm). Roller-cam-drive® mechanism for both rotary axes ensures sufficient rigidity for 4+1 axis heavy machining, and high rotation speed helps shorten overall cycle time compared as conventional worm gear mechanism.
Multitasking turning & milling centers
VMT-X200: Turning & Milling in one set-up; Y-axis travel 260 mm; Max. turning dimension Ø500 x 1075 mm; Turning spindle 4200 rpm / 15* kW with 8″ chuck; Milling spindle 12000 rpm / 22 kW; with HSK-T63 / A63 tooling; ATC-40 tools
VMT-X200: Turning & Milling in one set-up; Y-axis travel 420 mm; Max. turning dimension Ø720 x 2010 mm; Turning spindle 3000 rpm / 30 kW with 12″ chuck; Milling spindle 12000 rpm / 37 kW; with HSK-T63 / A63 tooling; ATC-60 tools